天然氣發電機組燃料供應檢查：確保天然氣供應管道無泄露，并保持清潔，這是確保機組正常運行的關鍵。

Fuel supply inspection for natural gas generator units: Ensure that the natural gas supply pipeline is leak free and clean, which is the key to ensuring the normal operation of the unit.

檢查機油液位：定期檢查機油液位，保證其在規定的范圍內。如果機油不足，應立即補充。

Check oil level: Regularly check the oil level to ensure it is within the specified range. If there is insufficient oil, it should be replenished immediately.

清潔和檢查冷卻系統：冷卻系統應保持清潔，無雜物堵塞。檢查冷卻液的液位和濃度，確保其正常工作。

Cleaning and inspecting the cooling system: The cooling system should be kept clean and free from debris blockages. Check the level and concentration of the coolant to ensure its normal operation.

天然氣發電機組電氣系統檢查：包括檢查電纜接線和發電機控制面板等，確保無破損或松脫。

Electrical system inspection of natural gas generator set: including checking cable wiring and generator control panel to ensure no damage or looseness.

天然氣發電機組每日啟動后檢查：在每次啟動后，應檢查發電機是否有異常聲音或振動，以及排煙顏色是否正常。

Daily post start inspection of natural gas generator units: After each start, the generator should be checked for any abnormal sounds or vibrations, as well as for normal smoke exhaust color.

定期潤滑：根據制造商的推薦，對需要潤滑的部位定期加注潤滑油或潤滑脂。

Regular lubrication: According to the manufacturer's recommendation, regularly add lubricating oil or grease to the parts that need lubrication.

定期更換消耗品：如空氣濾清器機油濾清器和燃油濾清器等，應按照維護手冊的建議定期更換。

Regularly replace consumables, such as air filters, oil filters, and fuel filters, according to the maintenance manual's recommendations.

天然氣發電機組預防性維護：根據發電機組的運行時間和使用情況，制定定期的預防性維護計劃，如每運行一定小時數后的檢查和更換部件。

Preventive maintenance of natural gas generator sets: Based on the operating time and usage of the generator set, develop a regular preventive maintenance plan, such as inspecting and replacing components after a certain number of hours of operation.

記錄與報告：每次維護后都應詳細記錄所做的檢查和維護內容，以便于追蹤和管理。

Recording and reporting: Detailed records of inspections and maintenance activities should be kept after each maintenance for easy tracking and management.

安全注意事項：在進行任何維護操作時，都應遵循安全操作規程，確保工作人員的安全。

Safety precautions: When carrying out any maintenance operations, safety operating procedures should be followed to ensure the safety of workers.